张大海，东南大学高速飞行器结构与热防护教育部重点实验室，副教授、博士生导师，获江苏省优秀青年科学基金资助、入选江苏省科协青年科技人才托举工程、入选东南大学“至善青年学者”。

主要从事高速飞行器结构轻量化设计、高速飞行器结构冲击防护以及航空发动机转子动力学等方面研究，主持国家自然科学基金、重点装备基础理论及关键技术攻关、两机专项课题等项目。近五年发表高水平SCI/EI论文50余篇，授权国家发明专利20余项，登记软件著作权8项，获江苏省科学技术一等奖（排3）等省部级科研奖励2项、江苏省振动工程学会科学技术一等奖（排1）、中国仪器仪表学会科技进步一等奖（排5）等学会科技奖励3项。担任IEEE工业工程与应用国际会议技术委员会委员、《兵器装备工程学报》青年编委、《粉末冶金材料科学与工程》特聘编委，江苏省振动工程学会常务理事。

欢迎有志于从事航空航天事业的优秀学子加入“高速飞行器结构与热防护教育部重点实验室”，实验室介绍详见：https://me.seu.edu.cn/amc/，实验室每年招收博士研究生5~7名（2024年仍有名额），硕士研究生10~15名，请有意向同学发送个人简历至DZhang@seu.edu.cn咨询。

2007年09月-2011年06月 东南大学，机械工程专业，本科

2011年09月-2018年06月 东南大学，工程力学专业，博士 

2016年05月-2017年05月 澳大利亚莫纳什大学&斯威本科技大学，机械工程专业，博士联合培养

2018年07月—2021年03月       东南大学，机械工程学院，讲师、硕士生导师

2021年04月—至今                   东南大学，机械工程学院，副教授(破格）、博士生导师

《理论力学B》，本科生课程，64学时

《理论力学C》，本科生课程，56学时

江苏省振动工程学会常务理事、副秘书长

IEEE工业工程与应用国际会议技术委员会委员

《兵器装备工程学报》青年编委

《粉末冶金材料科学与工程》特聘编委

江苏省振动工程学会科学技术一等奖（排1）

江苏省科学技术一等奖（排3）

JD科技进步二等奖（排7）

中国仪器仪表学会科技进步一等奖（排5）

江苏省科协青年科技人才托举工程

东南大学“至善青年学者（B层次）

东南大学机械工程学院“优才培育计划”  

代表性论文

[1] Peifei Xu, Dahai Zhang*, Qingguo Fei*. Carbon, 2024, 219: 118782. (一区TOP，IF: 10.9)

[2] Rui Zhu, D Jiang, Stefano M, Dario A, Dahai Zhang*, Qingguo Fei*. AIAA J, 2023, 61(6), 2666-74. (美国航空航天学会主刊)

[3] Dahai Zhang, G Lu*, D Ruan, Qingguo Fei. IJMS, 2020, 171: 105403. (一区TOP, IF: 7.3)

[4] Dahai Zhang, G Lu*, D Ruan, Qingguo Fei*,Wenhui Duan. Materials & Design, 2019, 167: 10763.（一区TOP, IF: 9.4）

[5] Dahai Zhang, Qingguo Fei*, Dong Jiang,Yanbin Li. Composite Structures. 2018, 192:289-299. (一区TOP，IF: 6.3)

其他论文

[1] Dahai Zhang, Rui Jing, Minxue Wang,Peifei Xu, Dong Jiang, Yanbin Li, Qingguo Fei. Axial Crushing and EnergyAbsorption of Graded Hierarchical Hexagonal Tubes [J]. Mechanics of AdvancedMaterials and Structures, 2024.

[2] Peifei Xu, Dahai Zhang*, Qingguo Fei. The performance transition of C/SiC composites induced byredistribution of residual stress [J]. Carbon, 2024, 219: 118782.

[3] 许志远，谭志勇，徐培飞，张大海*，费庆国. 含缺陷C/C-SiC缎纹编织复合材料的压缩损伤及失效机制[J]. 材料工程, 2024.

[4] 孙前杨，张培伟，张大海，柳友志，李彦杰，艾兴，费庆国. 航空发动机轮盘偏心孔和榫槽结构特征模拟件设计方法研究[J]. 工程力学, 2024.

[5] 吴军，徐培飞，荆瑞，张大海*，费庆国. SiC/SiC 复合材料层板低速冲击及其剩余强度试验研究[J]. 无机材料学报, 2024, 39(1): 51-60.

[6] Junzeng He, Dong Jiang, Dahai Zhang*, Zhenhuan Tang, Qingguo Fei*. Model updating of rotor system based onthe adoptive Gaussian process model using unbalance response [J]. Journal ofSound and Vibration, 2024, 571:118006.

[7] Xueyang Miao, Junzeng He,Dahai Zhang*, Dong Jiang, Jian Li, Xing Ai, Qingguo Fei. Nonlinear response analysisof variable speed rotor system under maneuvering flight. [J] Journal ofMechanical Science and Technology, 2023: 1-15.

[8] Rui Zhu, Dong Jiang,Stefano Marchesiello, Dario Anastasio, Dahai Zhang*, Qingguo Fei*. Automatic nonlinear subspace identification usingclustering judgment based on similarity filtering [J]. AIAA Journal, 2023, 61(6),2666-2674.

[9]     Rui Zhu, Dong Jiang,Zhixiang Huang, Lei Xie, DahaiZhang*, Qingguo Fei*. Full-fieldmodal identification using reliability-guided frequency-domainbased digitalimage correlation method based on multi-camera system [J]. Measurement, 2023, 211:112567.

[10]  Rui Zhu, Dong Jiang,Xiaochen Hang, DahaiZhang*, Qingguo Fei*. Usingnovel nonlinear subspace identification to identify airfoil-store system withnonlinearity [J].Aerospace Science and Technology, 2023, 142:108647.

[11]  万周，何俊增，姜东，李坚，张大海*基于参数优化SDP分析的转子故障诊断方法[J]. 振动与冲击, 2023, 42(1): 81-88.

[12]  Minxue Wang, DahaiZhang*. Numerical Simulation of Crushing and Energy Absorption of GradedHierarchical Honeycomb [J]. Advances in Transdisciplinary Engineering, 2023,35: 270-278.

[13]  Peifei Xu , Zhengong Zhou, Dahai Zhang , Peiwei Zhang , Yanbin Li , Qingguo Fei , The investigation on dynamicdamage evolution and energy absorption of FML pin joints with different plystacking sequences, International Journal of Impact Engineering, 2023,178:104594.

[14]  Yusheng Wang, ZhixiangHuang, Pengfei Zhu, Rui Zhu, Tianci Hu, Dahai Zhang, Dong Jiang, Effects of compressed speckle image on digital imagecorrelation for vibration measurement [J]. Measurement, 2023, 217:113041.

[15]  Liye Pei, Dahai Zhang*, Fujian Xu, Yu Lu, Xing Ai. A Model-Based Method for ImbalanceIdentification of Aero-Engine Rotor [C].Human-Centered Aerospace Systems and Sustainability Applications, Vol.98, 2023, 32–43.

[16]  Dong Jiang, Hui Qian,Yusheng Wang, Jincheng Zheng, DahaiZhang, Qiyu Li. Data drivenprediction of fatigue residual stiffness of braided ceramic matrix compositesbased on Latent-ODE [J]. Composite Structures, 2023, 323:117504.

[17]  Junzeng He, Dong Jiang, Dahai Zhang*, Jian Li, Qingguo Fei* Interval model validation for rotor supportsystem using Kmeans Bayesian method [J]. Probabilistic Engineering Mechanics,2022, 70: 103364.

[18]  Mingyu Cai, Dahai Zhang*, Song Wu, Qingguo Fei. Numerical investigation on crashworthiness offiber braided composites subjected to oblique hypervelocity impact [C]. 2022IEEE 9th International Conference on Industrial Engineering and Applications,2022, doi: 10.18178/wcse.2022.04.121.

[19]  Chaobing Zhu, Dahai Zhang*, Qingguo Fei. Impact characteristics and strength evaluation of aslender body obliquely entering water at high speed [C]. Journal of Physics:Conference Series, 2338 (2022) 012024.

[20]  Yongjie Xu, Yu Tian, Qiyu Li, Yanbin Li, DahaiZhang, Dong Jiang. Vibro-Impact Response Analysis of Collision with Clearance:A Tutorial [J]. Machines, 2022, 10(9), 814.

[21]  Yongjie Xu, Jingze, Liu, Zhou Wan, Dahai Zhang,Dong Jiang. Rotor Fault Diagnosis Using Domain-Adversarial Neural Network withTime-Frequency Analysis [J]. Machines, 2022, 10(8), 610.

[22]  Weicheng Huang, Dongze He, Yanbin Li, DahaiZhang, Huaiwu Zou, Hanwu Liu, Wenmiao Yang, Longhui Qin, Qingguo Fei.Nonlinear dynamic modeling of a tether-net system for space debris capture [J].Nonlinear Dynamics, 2022 Sep 3:1-9.

[23]  Dong Jiang, Hui Qian, Yu Xu, Dahai Zhang, JinchengZheng. Residual strength of C/SiC composite after low-velocity impact[J].Materials Today Communications, 2022, 30:103140.

[24]  Hui Qian, Yimeng Wu, Rui Zhu, Dahai Zhang,Dong Jiang. Modal Identification of Ultralow-Frequency Flexible StructuresBased on Digital Image Correlation Method [J]. Applied Sciences, 2022, 12, 185.

[25]  Jincheng Zheng, Peiwei Zhang, Dahai Zhang, Dong Jiang. A Multi-scale Submodel Method for FatigueAnalysis of Braided [J]. Materials, 2021, 14:4190.

[26]  Binbin Wang, Jingze Liu, Zhifu Cao, Dahai Zhang, Dong Jiang. A multiple andmulti-level substructure method for the dynamics of complex structures [J].Applied Sciences, 2021, 11(12): 5570.

[27]  Yu Tian, Hui Qian, Zhifu Cao, Dahai Zhang, Dong Jiang. Identification of Pre-Tightening TorqueDependent Parameters for Empirical Modeling of Bolted Joints [J]. AppliedSciences, 2021, 11: 9134.

[28]  Jingze Liu, Qingguo Fei*, Shaoqing Wu, ZhenhuanTang, Dahai Zhang. Nonlinearvibration response of a complex aeroengine under the rubbing fault [J].Nonlinear Dynamics, 2021, 106: 1869-1890.

[29]  Jingze Liu, Qingguo Fei, Shaoqing Wu, Dahai Zhang, Dong Jiang. Dynamicresponse of curvilinearly stiffened plates under thermal environment [J]. Journal of Mechanical Science and Technology, 2021,35(6): 2359-2367.

[30]  Jingze Liu, Qingguo Fei, Shaoqing Wu, ZhenhuanTang, Sanfeng Liao, Dahai Zhang. AnEfficient Dynamic Modeling Technique for a Central Tie Rod Rotor [J]. InternationalJournal of Aerospace Engineering, 2021, 2021: 6618828.

[31]  徐伟文，张大海，王平，刘璟泽，费庆国，姜东. 转子挤压油膜阻尼器静偏心对减振效果的影响[J]. 振动与冲击，2021. 40 (21):55-61.

[32]  万周，刘璟泽，张大海，陈强，唐振寰，费庆国. 基于LSTM的航空发动机整机支承刚度识别方法[J]. 东南大学学报，2021. 51(4)：672-678.

[33]  李坚，孟卫华，张大海，艾兴. 分层密度梯度蜂窝材料面内动态压缩及吸能特性[J]. 应用力学学报，2021. 38(6)：146-152.

[34]  DahaiZhang, Guoxing Lu, Dong Ruan, Qingguo Fei. EnergyAbsorption in the Axial Crushing of Hierarchical Circular Tubes [J].International Journal of Mechanical Sciences, 2020, 171: 105403.

[35]  DahaiZhang, Qingguo Fei, Jingze Liu, Dong Jiang, Yanbin Li.Crushing of vertex-based hierarchical honeycombs with triangular substructures [J].Thin-walled Structures, 2020, 146: 106436.

[36]  Zhifu Cao, Qingguo Fei, Dong Jiang, Dahai Zhang, Hui Jin, Rui, Zhu. Dynamicsensitivity-based finite element model updating for nonlinear structures usingtime-domain responses [J]. International Journal of Mechanical Sciences, 2020,184: 105788.

[37]  Jingze Liu, Qingguo Fei, Dong Jiang, Dahai Zhang, Shaoqing Wu. Experimentaland numerical investigation on static and dynamic characteristics forcurvilinearly stiffened plates using DST-BK model [J]. International Journal ofMechanical Sciences, 2020, 169: 105286.

[38]  Jingwei Yu, Qingguo Fei, Peiwei Zhang, Yanbin Li, Dahai Zhang, Fei Guo. An InnovativeYield Criterion Considering Strain Rates Based on Von Mises Stress.ASME-Journal of Pressure Vessel Technology. 2020, 142: 014501-1.

[39]  DahaiZhang, Guoxing Lu, Dong Ruan, Qingguo Fei, Wenhui Duan.Quasi-static combined compression-shear crushing of honeycombs: An experimentalstudy [J]. Materials & Design, 2019, 167: 107632.

[40]  DahaiZhang, Qingguo Fei, Dong Jiang, Yanbin Li. Numerical andanalytical investigation on crushing of fractal-like hierarchical honeycombs[J]. Composite Structures. 2018, 192:289-299.

[41]  DahaiZhang, Qingguo Fei, Peiwei Zhang. In-plane dynamic crushingbehavior and energy absorption of honeycombs with a novel type of multi-cells[J]. Thin-walled Structures, 2017, 117: 199-210.

[42]  DahaiZhang, Qingguo Fei, Peiwei Zhang. Drop-weight impactbehavior of honeycomb sandwich panels under a spherical impactor [J]. CompositeStructures, 2017, 168: 633-645.

[1] 张大海，柳友志，费庆国，刘璟泽，何顶顶. 一种可调的自动对中宽板夹具. ZL201810926879.0. 国家发明专利（授权）

[2] 张大海，何俊增，刘璟泽，费庆国. 一种叶片倾角可调的碰摩装置. ZL202010022414.X. 国家发明专利（授权）

[3] 张大海，柳友志，费庆国，刘璟泽，何顶顶. 一种基于双轴拉伸试验的材料泊松比测量方法. ZL201810933222.7. 国家发明专利（授权）