吴泽，男，1986年7月出生，中共党员，工学博士，副教授，博士生导师。主要从事干切削加工及刀具、微纳二维超材料、智能制造的研究工作，主持国家自然科学基金、省自然科学基金、地方成果转化等多项科研项目，在Nano-Micro Letters(IF=31.6)、Nano Energy(IF=16.8)、Chemical Engineering Journal(IF=15.1)、Journal of Cleaner Production(IF=11.1)、Carbon(IF=10.5)等国际期刊发表SCI收录论文60余篇（其中一作/通讯论文30余篇），获授权发明专利30余项，参撰出版国家规划学术专著和国家规划教材各1本。作为主要完成人获得教育部自然科学二等奖2项（排2、4，校内均排1）、中国仪器仪表学会科技进步一等奖1项（排4）、中国发明协会发明创业成果二等奖1项（排2）、其它厅局级科技奖励7项，作为主要完成人入选江苏省行业领域优秀科技进展（排2）。

   招收博士、硕士研究生，有意者发送个人简历至wuze@seu.edu.cn或电联15195978061！

2008.09-2013.06，山东大学，机械工程学院，研究生/博士

2004.09-2008.06，中国矿业大学，机电工程学院，本科/学士

2018.04-至今，东南大学，机械工程学院，副教授，遴选硕导（2020）、博导（2021）

2014.05-2017.09，盛利维尔（中国）新材料技术股份有限公司，博士后

2013.06-2018.04，东南大学，机械工程学院，讲师

工程材料及成形

机械制造工程学

流体力学

Journal of Cleaner Production;

Ceramics International;

Journal of Manufacturing Processes;

Surface & Coatings Technology;

Wear;

Tribology International.

中国机械工业金属切削刀具技术协会 理事

中国机械工程学会摩擦学青年工作委员会 委员

江苏省高校工程训练教学研究会 理事

中国机械工程学会 高级会员

中国微米纳米技术学会 高级会员

2013年获得山东省优秀博士毕业生称号

2013年获得山东省高等学校优秀科研成果自然科学二等奖（排2）

2014年获得教育部自然科学二等奖（排4，校内排1）

2015年获得东南大学青年教师授课竞赛三等奖

2016年获得东南大学教学成果二等奖（排8）

2018年获得山东省高等学校科学技术一等奖（排2）

2019年入选镇江市先进制造业领军人才

2020年入选东南大学“至善青年学者”（A类）支持计划

2021年获得教育部自然科学二等奖（排2，校内排1）

2023年获得江苏省仪器仪表学会科学技术一等奖（排3）

2023年获得中国仪器仪表学会科技进步一等奖（排4）

2024年获得中国发明协会发明创业成果二等奖（排2）

2024年入选江苏省行业领域优秀科技进展（排2）

[1] Ze Wu, Xiuli Tan, Jianqiao Wang, Youqiang Xing, Peng Huang, Bingjue Li, Lei Liu*. MXene hollow spheres supported by C-Co exoskeleton grow MWCNTs for efficient microwave absorption. Nano-Micro Letters, 2024, 16: 107. (IF=31.6)

[2] Ze Wu, Enjie Zhu, Youqiang Xing, Peng Huang, Bingjue Li, Lei Liu*. Magnetic modulation to construct MXene/CNT@Fe3O4 electrodes with 3D conductive structures for ionic artificial muscles. Carbon, 2024, 221: 118953. 

[3] Ze Wu, Tao Yang, Youqiang Xing, Peng Huang, Bingjue Li, Lei Liu. MXene/BC@CoFe2O4 aerogel with excellent electromagnetic interference shielding and enhanced mechanical property. Journal of Alloys and Compounds, 2024, 985: 174117. 

[4] Ze Wu, Shuangqing Ma, Youqiang Xing, Jianqiao Wang, Bingjue Li, Lei Liu*. Hierarchical composite foams possessing an electric network layer modified with MoS₂ by atomic layer deposition as high-performance and tunable absorbers. Chemical Engineering Journal, 2023, 455: 140607.

[5] Ze Wu*, Xinke Yao, Youqiang Xing*. A review of nitrogen-doped graphene aerogel in electromagnetic wave absorption. Micromachines, 2023, 14: 1762.

[6] Ze Wu*, Xiuli Tan, Guochao Li*, Youqiang Xing. Tribological properties of groove-textured Ti-6Al-4V alloys with solid lubricants in dry sliding against GCr15 steel balls. Micromachines, 2023, 14: 1978.

[7] Xiang Li#, Ze Wu# (共同一作), Bingjue Li#, Youqiang Xing, Peng Huang, Lei Liu*. Selaginella lepidophylla-inspired multi-stimulus cooperative control MXene-based flexible actuator. Soft Robotics, 2023, 10(5): 861-872. (IF=6.4)

[8] Jingwen He#, Ze Wu# (共同一作), Bingjue Li#, Youqiang Xing, Peng Huang, Lei Liu*. Multi-stimulus synergistic control soft actuators based on laterally heterogeneous MXene structure. Carbon, 2023, 202: 286-295.

[9] Youqiang Xing*, Yun Wang, Lei Liu, Ze Wu*. Fabrication of MoS₂/C60 Nanolayer Field-Effect Transistor for Ultrasensitive Detection of miRNA-155. Micromachines, 2023, 14: 660.

[10] Youqiang Xing, Cheng Luo, Mingyu Zhu, Yanhua Zhao, Kornel Ehmann, Ze Wu*, Lei Liu*. Assessment of self-lubricating coated cutting tools fabricated by laser additive manufacturing technology for friction-reduction. Journal of Materials Processing Technology, 2023, 318: 118010.

[11] Huiqin Li#, Ze Wu# (共同一作), Youqiang Xing, Bingjue Li, Lei Liu*. Photoelectric synergistic response properties of the Ti₃C₂T_xMXene-CNT/ PDMS bilayer actuator. Nano Energy, 2022, 103: 107821.

[12] Ze Wu, Hang Bao, Youqiang Xing*, Lei Liu*. Dry cutting performance and heat transfer simulation of pulsating heat pipe self-cooling tool holder. Journal of Manufacturing Processes, 2022, 83: 129-142.

[13] Jianqiao Wang#, Ze Wu# (共同一作), Youqiang Xing, Lei Liu*. A novel 1D/2D interpenetrating network architecture of MXene/cellulose composite microfiber and graphene for broadband microwave absorption. Chemical Engineering Journal, 2022, 439: 135734.

[14] Ze Wu, Hang Bao, Youqiang Xing*, Lei Liu*. Heat transfer performance and prediction of open pulsating heat pipe for self-cooling cutting tool. International Journal of Advanced Manufacturing Technology, 2022, 121(9-10): 6951-6972.

[15] Youqiang Xing, Xingsheng Wang, Zhonghua Du, Zhiwei Zhu, Ze Wu*, Lei Liu*. Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si₃N₄/TiC ceramic. Ceramics International, 2022, 48(1): 514-524.

[16] Lei Liu, Jianlun Guo, Youqiang Xing, Ze Wu*. Ultrasensitive surface-enhanced raman scattering (SERS) detection for miRNA-182 based on CdS/MoS₂@AuNPs fabricated by atomic layer deposition (ALD). Advanced Materials Interfaces, 2022, 9(17): 2102221.

[17] Jiansong Chen, Ze Wu*. Effect of textured dimples on the tribological behavior of WC/Co cemented carbide in dry sliding with Al₂O₃/WC ceramic. Micromachines, 2022, 13(8): 1269.

[18] Ze Wu, Hang Bao, Youqiang Xing*, Lei Liu*. Tribological characteristics and advanced processing methods of textured surfaces: a review. International Journal of Advanced Manufacturing Technology, 2021, 114(5-6): 1241-1277.

[19] Ze Wu*, Youqiang Xing*, Jiansong Chen*. Improving the performance of micro-textured cutting tools in dry milling of Ti-6Al-4V alloys. Micromachines, 2021, 12(8): 945.

[20] Youqiang Xing, Cheng Luo, Yizhi Wan, Peng Huang, Ze Wu*, Kedong Zhang*. Formation of bionic surface textures composed by micro-channels using nanosecond laser on Si₃N₄-based ceramics. Ceramics International, 2021, 47(9): 12768-12779.

[21] Youqiang Xing, Xiang Li, Ruoyu Hu, Xueying Long, Ze Wu*, Lei Liu*. Numerical analyses of rectangular micro-textures in hydrodynamic lubrication regime for sliding contacts. Meccanica, 2021, 56(2): 365-382.

[22] Ze Wu, Hang Bao, Lei Liu*, Youqiang Xing*, Peng Huang, Guolong Zhao*. Numerical investigation of the performance of micro-textured cutting tools in cutting of Ti-6Al-4V alloys. International Journal of Advanced Manufacturing Technology, 2020, 108(1-2): 463-474.

[23] Ze Wu, Youqiang Xing*, Lei Liu*, Peng Huang, Guolong Zhao. Design, fabrication and performance evaluation of pulsating heat pipe assisted tool holder. Journal of Manufacturing Processes, 2020, 50: 224-233.

[24] Youqiang Xing, Kedong Zhang, Peng Huang, Lei Liu*, Ze Wu*. Assessment machining of micro-channel textures on PCD by laser-induced plasma and ultra-short pulsed laser ablation. Optics and Laser Technology, 2020, 125: 106057.

[25] Ze Wu*, Youqiang Xing, Peng Huang, Lei Liu. Tribological properties of dimple-textured titanium alloys under dry sliding contact. Surface & Coatings Technology, 2017, 309: 21-28.

[26] Ze Wu*, Yang Yang, Chun Su, Xiao Cai, Chen Luo. Development and prospect of cooling technology for dry cutting tools. International Journal of Advanced Manufacturing Technology, 2017, 88(5-8): 1567-1577.

[27] Ze Wu*, Yang Yang, Chen Luo. Design, fabrication and dry cutting performance of pulsating heat pipe self-cooling tools. Journal of Cleaner Production, 2016, 124: 276-282.

[28] Ze Wu*, Jianxin Deng, Chun Su, Chen Luo, Dan Xia. Performance of the micro-texture self-lubricating and pulsating heat pipe self-cooling tools in dry cutting process. International Journal of Refractory Metals & Hard Materials, 2014, 45: 238-248.

[29] Ze Wu, Jianxin Deng*, Youqiang Xing, Hongwei Cheng, Jun Zhao. Effect of surface texturing on friction properties of WC/Co cemented carbide. Materials & Design, 2012, 41: 142-149.

[30] Ze Wu, Jianxin Deng*, Hui Zhang, Yunsong Lian, Jun Zhao. Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys. Wear, 2012, 292: 135-143.

[1] 国家自然科学基金面上项目：原子层沉积的氧化铝/二硫化钼复合涂层刀具的基础研究，52375413，2024.01-2027.12，50万元，主持，在研；

[2] 国家自然科学基金面上项目：面向绿色智能切削的相变冷却刀具及其磨损感知的基础研究，52075097，2021.01-2024.12，58万元，主持，在研；

[3] 国家自然科学基金面上项目：超声脉冲介入光纤光栅复用理论与方法研究，51775051，2018.01-2021.12，30/60万元，校内主持，结题；

[4] 国家自然科学基金青年项目：电子束织构自润滑与振荡热管自冷却复合功效的干切削刀具的研究，51405080，2015.01-2017.12，25万元，主持，结题；

[5] 技术转化财政支持（镇江市金山英才）：新型涂层刀具的研发及产业化，2019.07-2020.12，100万元，主持，结题；

[6] 江苏省自然科学基金面上项目：振荡热管自冷却刀具的研究，BK20161203，2016.07-2019.06，10万元，主持，结题；

[7] 中国博士后科学基金面上项目：面向绿色切削的振荡热管刀具的基础研究，2014M561547，2014.09-2017.08，5万元，主持，结题。