成利

发布者:发布时间:2016-05-13浏览次数:307


职称

教授

办公室


联系电话

27666769

E-mail

li.cheng@polyu.edu.hk

学习经历

1984   西安交通大学       硕士学位

1986   法国INSA-Lyon    DEA degree

1989   法国INSA-Lyon    Ph.D degree

工作经历

1989-1991  加拿大 舍尔布鲁大学

1992  拉瓦尔大学 机械工程系

2000  香港理工大学 教授

2005  香港理工大学 首席教授

2011-2014 香港理工大学 机械工程学院院长

美国声学学会 理事

中国声学学会 理事

机械工程师协会和香港工程师协会 理事

美国声学学会杂志 副主编

中国声学杂志 编辑组成员

第四十六届噪声控制国际会议 主席

第十四届亚太振动会议主席

教授课程


研究方向

Noise and vibration control

Fluid-structure interaction

Damage detection and smart material/structure/products

获奖情况

2015/2016 Faculty of Engineering Research Grant Achievement Award 2014

2012/2013 The Appreciation of Research Achievement, The Committee of Science and Technology Innovation of Shenzhen

2012/2013 Merit Award (Highest International Consultancy), PTeC's Annual Outstanding Professional Services Awards 2012

2011/2012 Merit Award (Multi-departmental Participation), PTeC's Annual Outstanding Professional Services Awards 2011

论文著作

1. Tang L, Cheng L, Ji H, Qiu J H. Characterization of acoustic black hole effect using a one-dimensional fully-coupled and wavelet-decomposed semi-analytical model[J]. Journal of Sound and Vibration, 2016, 374:172–184.

2. Lu Z B, Halim D, Cheng L. Flow-induced noise control behind bluff bodies with various leading edges using the surface perturbation technique[J]. Journal of Sound and Vibration, 2016, 369:1–15.

3. Shan S B, Qiu J H, Zhang C, et al. Multi-damage Localization on Large Complex Structures through an Extended Delay-and-sum Based Method[J]. Structural Health Monitoring: An International Journal, 2016, 15(1):50–64.

4. Xi Q, Choy Y S, Cheng L, et al. Noise control of dipole source by using micro–perforated panel housing[J]. Journal of Sound and Vibration, 2016, 362:39–55.

5. Yu X, Cui F S, Cheng L. On the acoustic analysis and optimization of ducted ventilation systems using a sub–structuring approach[J]. Journal of the Acoustical Society of America, 2016, 139(1):279–289.

6. Ji H, Qiu J H, Cheng L, Nie H. Semi-active vibration control based on unsymmetrical synchronized switch damping: Analysis and experimental validation of control performance[J]. Journal of Sound and Vibration, 2016, 370:1–22.

7. Ji H, Qiu J H, Zhang J, et al. Semi-active vibration control based on unsymmetrical synchronized switch damping: Circuit Design[J]. Journal of Intelligent Material Systems and Structures, 2016, 27(8):1106–1120.

8. Yang C, Cheng L. Sound absorption of microperforated panels inside compact acoustic enclosures[J]. Journal of Sound and Vibration, 2016, 360:140–155.

9. Zhang C, Cheng L, Xu H, Qiu J H. Structural damage detection based on virtual element boundary measurement[J]. Journal of Sound and Vibration, 2016, 372:133–146.

10. Yang C, Cheng L. Suppression of bending waves in a beam using resonators with different separation lengths[J]. Journal of the Acoustical Society of America, 2016, 139(5):2361–2371.

11. Sun X, Jing X, Cheng L, et al. A 3–D Quasi–Zero–Stiffness–Based Sensor System for Absolute Motion Measurement and Application in Active Vibration Control[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(1):254–262.

12. Xu H, Su Z, Cheng L, et al. A “Pseudo–excitation” approach for structural damage identification: From “Strong” to “Weak” modality[J]. Journal of Sound and Vibration, 2015, 337:181–198.

13. Cheung Y L, Wong W O, Cheng L. A subsystem approach for analysis of dynamic vibration absorbers suppressing broadband vibration[J]. Journal of Sound and Vibration, 2015, 342:75–89.

14. Yu X, Cheng L. Duct noise attenuation using reactive silencer with various internal configurations[J]. Journal of Sound and Vibration, 2015, 335:229–244.

15. Yu X, Cheng L, You X. Hybrid silencers with micro–perforated panels and internal partitions[J]. Journal of the Acoustical Society of America, 2015, 137(2):951–962.

16. Yang C, Cheng L, Hu Z. Reducing interior noise in a cylinder using micro–perforated panels[J]. Applied Acoustics, 2015, 95:50–56.

17. Xu H, Lu B, Su Z, et al. Statistical enhancement of a dynamic equilibrium–based damage identification strategy: Theory and experimental validation[J]. Journal of Sound and Vibration, 2015, 351:236–250.

18. Zhang S, Cheng L. Shape optimization of acoustic enclosures based on a Wavelet–Galerkin formulation[J]. International Journal of Applied Mechanics, 2015, 07(01):1550009.

19. Yu X, Tong Y, Pan J, et al. Sub–chamber optimization for silencer design[J]. Journal of Sound and Vibration, 2015, 351:57–67.

20. Ziaja A, Cheng L, Su Z, et al. Thick hollow cylindrical waveguides: A theoretical, numerical and experimental study[J]. Journal of Sound and Vibration, 2015, 350:73–90.

21. Sun X T, Jing X, Xu J, et al. A Quasi–Zero–Stiffness–Based sensor system in vibration measurement[J]. IEEE Transactions on Industrial Electronics, 2014, 61(10):5606–5614.

22. Su Z, Zhou C, Hong M, et al. Acousto–ultrasonics–based fatigue damage characterization: Linear versus nonlinear signal features[J]. Mechanical Systems and Signal Processing, 2014, 45(1):225–239.

23. Sun X, Xu J, Jing X, et al. Beneficial performance of a quasi–zero–stiffness vibration isolator with time–delayed active control[J]. International Journal of Mechanical Sciences, 2014, 82(5):32–40.

24. Xiao Z, Jing X, Cheng L. Estimation of parametric convergence bounds for Volterra series expansion of nonlinear systems[J]. Mechanical Systems and Signal Processing, 2014, 45(1):28–48.

25. S Zhu, X Shi, R C K Leung et al. Impact of Construction-Induced Vibration on Vibration-Sensitive Medical Equipment: A Case Study[J]. Advances in Structural Engineering, 2014, 17(6):907–920.

26. Hong M, Wang Q, Su Z, et al. In situ health monitoring for bogie systems of CRH380 train on Beijing–Shanghai high–speed railway[J]. Mechanical Systems and Signal Processing, 2014, 45(2):378–395.

27. Ming H, Su Z, Qiang W, et al. Modeling nonlinearities of ultrasonic waves for fatigue damage characterization: theory, simulation, and experimental validation[J]. Ultrasonics, 2014, 54(3):770–778.

28. Xiang Y, Li C, Jean–Louis G. Modeling vibroacoustic systems involving cascade open cavities and micro–perforated panels[J]. Journal of the Acoustical Society of America, 2014, 136(2):659–670.

29. Yu X, Cheng L, Guyader J–L. On the modeling of sound transmission through a mixed separation of flexible structure with an aperture[J]. Journal of the Acoustical Society of America, 2014, 135(5):2785–2796.

30. Liu Y, Choy Y S, Huang L, et al. Reactive control of subsonic axial fan noise in a duct[J]. Journal of the Acoustical Society of America, 2014, 136(4):1619–1630.

31. Ji H, Qiu J, Nie H, et al. Semi–active vibration control of an aircraft panel using synchronized switch damping method[J]. International Journal of Applied Electromagnetics and Mechanics, 2014, 46(4):879–893.

32. Sun X, Jing X, Xu J, et al. Vibration isolation via a scissor–like structured platform[J]. Journal of Sound and Vibration, 2014, 333(9):2404–2420.

33. Yang C, Pan J, Cheng L. A mechanism study of sound wave–trapping barriers[J]. Journal of the Acoustical Society of America, 2013, 134(3):1960–1969.

34. Cao M, Su Z, Cheng L, et al. A multi–scale pseudo–force model for characterization of damage in beam components with unknown material and structural parameters[J]. Journal of Sound and Vibration, 2013, 332(21):5566–5583.

35. Yang C, Cheng L, Pan J. Absorption of oblique incidence sound by a finite micro–perforated panel absorber[J]. Journal of the Acoustical Society of America, 2013, 133(1):201–209.

36. Jing X J, Cheng L. An optimal PID control algorithm for training feedforward neural networks[J]. IEEE Transactions on Industrial Electronics, 2013, 60(6):2273–2283.

37. Lu Z B, Halim D, Cheng L. Closed–loop control of flow–induced sound in a flow duct with downstream resonant cavities[J]. Journal of the Acoustical Society of America, 2013, 133(3):1468–1479.

38. Xu H, Cheng L, Su Z, et al. Damage visualization based on local dynamic perturbation: Theory and application to characterization of multi–damage in a plane structure[J]. Journal of Sound and Vibration, 2013, 332(14):3438–3462.

39. Chen J, Su Z, Cheng L, et al. Exploring and calibrating local curvature effect of cortical bone for quantitative ultrasound (QUS)[J]. Structural Engineering and Mechanics, 2013, 48(4):501–518.

40. Zhou C, Hong M, Su Z, et al. Evaluation of fatigue cracks using nonlinearities of acousto–ultrasonic waves acquired by an active sensor network[J]. Smart Materials and Structures, 2013, 22(1):15018–15029(12).

41. Ning H, Jing X, Cheng L. Identification of non–linear stochastic spatiotemporal dynamical systems[J]. IET Control Theory and Applications, 2013, 7(17):2069–2083.

42. Fan R, Su Z, Cheng L. Modeling, analysis, and validation of an active T–shaped noise barrier[J]. Journal of the Acoustical Society of America, 2013, 134(3):1990–2003.

43. Cheung Y L, Wong W O, Cheng L. Optimization of a hybrid vibration absorber for vibration control of structures under random force excitation[J]. Journal of Sound and Vibration, 2013, 332(3):494–509.

44. Xu H, Su Z, Cheng L, et al. Reconstructing interfacial force distribution for identification of multi–debonding in steel–reinforced concrete structures using noncontact laser vibrometry[J]. Structural Health Monitoring, 2013, 12(5–6):507–521.

45. Shen C, Xin F X, Cheng L, et al. Sound radiation of orthogonally stiffened laminated composite plates under airborne and structure borne excitations[J]. Composites Science and Technology, 2013, 84(4):51–57.

46. Xu H, Cheng L, Su Z. Suppressing influence of measurement noise on vibration–based damage detection involving higher–order derivatives[J]. Advances in Structural Engineering, 2013, 16(1):233–244.

科研项目

1. Control of vibration and interior noise of vehicles

2. Design, analysis and optimization of industrial mufflers and silencers

3. Complex vibroacoustic systems with micro-perforates

4. Guided waves in thick-walled hollow cylinders for train axle inspection

5. Non-ideal Acoustic Black Hole structures for energy focalization: A time-domain approach based on laser excitation technique

6. Pseudo-Excitation based Structural Health Monitoring using Sparse Virtual Element Boundary Measurement

7. Semi-active vibration control based on synchronized switching damping and its application in aerospace engineering

8. Interior noise modeling, analysis and control for space structures

9. In-situ sound absorption of microperforated panels in compact acoustic environment

10. Suppression of flexural waves using resonators

11. Wavelets for acoustic and vibration analyses

12. Interior Noise Control Using Helmholtz Resonator

13. Nonlinear Third-harmonic Shear-horizontal Waves for Structural Health Monitoring through Incipient Defect Detection

14. Semi-analytical modelling and analyses on non-linear elasto-acoustic wave propagation for SHM applications

15. Semi-analytical modelling of Acoustic Black Hole structures

16. Design of noise insulation windows allowing natural ventilation

17. Active-Passive Approach for Axial Fan Noise Control in compact IT equipment